To Next PageTo Next Page
Need help?Do you have a question about the Standard Horizon GX2200 and is the answer not in the manual?
General| Brand | Standard Horizon |
|---|---|
| Model | GX2200 |
| Category | Transceiver |
| Language | English |
Outlines the procedure for making an emergency Mayday call and providing essential distress information.
Provides instructions for initiating contact with other vessels on channels 16 and 9.
Addresses RF exposure limits and safe antenna placement during installation.
Instructions for installing the radio using the supplied bracket for desktop or overhead mounting.
Covers proper connection of power supply, antenna, and accessories, including fuse replacement.
Details wiring and connections for various accessories like speakers, GPS, and chart plotters.
Identifies and explains the function of each control on the front panel.
Details the function of each connector on the rear panel.
Describes the operation of the microphone's PTT switch and other buttons.
Step-by-step guide on how to receive signals and adjust volume and squelch.
Procedures for transmitting, including PTT usage and speaking clearly.
Explains how to program and operate memory and priority scanning functions.
Instructions for using the hailer and fog horn functions with the PA speaker.
Introduces DSC, its purpose in maritime safety, and communication range.
Defines MMSI and provides information on how to obtain and program it.
Details transmitting and receiving DSC distress alerts, including nature of distress.
Procedures for transmitting and receiving All Ships calls (Safety or Urgency).
How to set up and transmit/receive individual DSC calls using the directory or manual entry.
Settings for establishing and managing group DSC calls and directories.
How to request and respond to vessel position requests via DSC.
Procedures for sending and receiving vessel position reports via DSC.
Setup for automatically tracking vessel positions at set intervals.
How to perform test calls to verify DSC functionality.
Manages individual DSC call settings, directory, and reply configurations.
How to view AIS targets, lists, and detailed vessel information on the display.
Procedures for marking the current position and manually entering waypoint data.
Identifies and describes the functions of the remote microphone's buttons and controls.
