2. Operation Procedure
9
Feed Tray
2-1 Operation Procedure
5. Pile sheets on feed tray.
- Face printed surface downward.
- Jog well and true up sheets toward feed
roller.
- Place sheets center of feed tray.
6. Slide both feed guides so that feed
guides slightly touch piled sheets.
- Place support rollers at 10 mm inside of
sheet edge.
7. Select sheet size with sheet size select
button.
NOTE
When irregular size sheets are folded, refer
to "2-2 Irregular Size Sheet Folding" (Page
12 to 14).
8. Select folding pattern with folding
pattern select button.
Feed Guide
Support
Roller
To Next Page
Loading...
