Standard Imaging A17 - Customer Responsibility

12
13
Customer Responsibility
This product and its components will perform properly and
reliably only when operated and maintained in accordance
with the instructions contained in this manual and accom-
panying labels. A defective device should not be used.
Parts which may be broken or missing or are clearly worn,
distorted or contaminated should be replaced immediately
with genuine replacement parts manufactured by or made
available from Standard Imaging Inc.
CAUTION: Federal law in the U.S.A. and Ca-
nadian law restrict the sale, distribution, or
use of this product to, by, or on the order of a
licensed medical practitioner. The use of this
product should be restricted to the supervision
of a qualied medical physicist. Measurement of
high activity radioactive sources is potentially
hazardous and should be performed by quali-
ed personnel.
Should repair or replacement of this product become
necessary after the warranty period, the customer should
seek advice from Standard Imaging Inc. prior to such re-
pair or replacement. If this product is in need of repair, it
should not be used until all repairs have been made and
the product is functioning properly and ready for use. After
repair, the product may need to be calibrated. The owner
of this product has sole responsibility for any malfunction
resulting from abuse, improper use or maintenance, or
repair by anyone other than Standard Imaging Inc.
The information in this manual is subject to change without
notice. No part of this manual may be copied or reproduced
in any form or by any means without prior written consent
of Standard Imaging Inc.
!