EasyManua.ls Logo

Standard Imaging A17 - Warranty

Standard Imaging A17
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
Warranty
Standard Imaging, Inc. sells this product under the warranty herein
set forth. The warranty is extended only to the buyer purchasing
the product directly from Standard Imaging, Inc. or as a new product
from an authorized dealer or distributor of Standard Imaging, Inc.
For a period provided in the table below from the date of original delivery to
the purchaser or a distributor, this Standard Imaging, Inc. product, provided
in the table is warranted against functional defects in design, materials and
workmanship, provided it is properly operated under conditions of normal
use, and that repairs and replacements are made in accordance herewith.
The foregoing warranty shall not apply if the product has been altered,
disassembled or repaired other than by Standard Imaging, Inc. or if the
product has been subject to abuse, misuse, negligence or accident.
Product Warranty Period
Standard Imaging
Ionization Chambers
2 years
Standard Imaging Well
Chambers
2 years
Standard Imaging
Electrometers
2 years
Standard Imaging
Software Products
1 year
All Other Standard
Imaging Products
1 year
Standard Imaging
Custom Product
90 days
Consumables 90 days
Serviced Product 90 days
Resale Products
As dened by the Original Equipment Manu-
facturer
ADCL Product
CalibrationADCL
Product Calibration
(Standard Imaging
uses the UW-ADCL
for recalibrations
required under war-
ranty)
0 - 90 days = 100% of ADCL Calibration Costs
91 - 182 days = 75% of ADCL Calibration Costs
183 – 365 days = 50% of ADCL Calibration Costs
366 – 639 days = 25% of ADCL Calibration Costs
(days from date of shipment to customer)
Standard Imaging’s sole and exclusive obligation and the purchaser’s sole
and exclusive remedy under the above warranties are, at Standard Imag-
ing’s option, limited to repairing, replacing free of charge or revising labeling
and manual content on, a product: (1) which contains a defect covered by
the above warranties; (2) which are reported to Standard Imaging, Inc. not
later than seven (7) days after the expiration date of the warranty period in
the table; (3) which are returned to Standard Imaging, Inc. promptly after
discovery of the defect; and (4) which are found to be defective upon exami-
nation by Standard Imaging Inc. Transportation related charges, (including,
but not limited to shipping, customs, tariffs, taxes, and brokerage fees) to
Standard Imaging are the buyer’s responsibility. This warranty extends to
every part of the product except consumables (fuses, batteries, or glass
breakage). Standard Imaging, Inc. shall not be otherwise liable for any
damages, including but not limited to, incidental damages, consequential
damages, or special damages. Repaired or replaced products are war-
ranted for the balance of the original warranty period, or at least 90 days.
This warranty is in lieu of all other warranties, express or implied,
whether statutory or otherwise, including any implied warranty of t-
ness for a particular purpose. In no event shall Standard Imaging,
Inc. be liable for any incidental or consequential damages resulting
from the use, misuse or abuse of the product or caused by any defect,
failure or malfunction of the product, whether a claim of such dam-
ages is based upon the warranty, contract, negligence, or otherwise.
This warranty represents the current standard warranty of Standard
Imaging, Inc. Please refer to the labeling or instruction manual of your
Standard Imaging, Inc. product or the Standard Imaging, Inc. web page
for any warranty conditions unique to the product.