EasyManua.ls Logo

Standard Imaging A17 - Features and Specifications

Standard Imaging A17
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
9
Collecting Volume:
Collecting Volume Length:
Collector Diameter:
Body Tube Outside Diameter:
Wall Thickness:
Chamber Length:
Body Tube and Guard Mate-
rial:
Response Uniformity over
the central 8.0 cm of chamber
length:
Collector Material:
Electrical Power Require-
ments:
Nominal Collection Efciency:
Maximum Polarizing Potential:
Nominal Inherent Leakage
Currents:
Low-Noise Triaxial Cable:
Connector:
Operating Parameters
Humidity:
Temperature:
Pressure:
Storage Parameters
Humidity:
Temperature:
Pressure:
Product Standards:
1.91 cc
8.0 cm
2.4 mm
12.7 mm
3.3 mm
17.0 cm
Shonka air-equivalent C552
plastic
±1.5%
Carbon Fiber
Operates at +300 VDC
100%
1000 VDC
10
-15
A
1.5 m long; 50 ohms; 29 pf/Ft
Triaxial BNC Plug (2-Lug
Male pin) and protective cap
connected by chain (standard);
others available upon request
20 to 80%, non-condensing
10 to 40
o
C
680 to 770 mm Hg
0 to 95%, non-condensing
-15 to 50
o
C
600 to 800 mm Hg
IEC 60601-1
1
, IEC 61674
1
Features and Specications
1
Designed to Meet