Standby W3 User Manual

W3 – Manual
WAM8W3A 1 Standby AB – standbygroup.se
W3
Safety
WARNING
This product contains high intensity LED devices. To prevent eye damage, do not look into the
light beam at close range.
Technical Data
Attribute Units
Lens
Polycarbonate
Color
, lens
Clear
or blue
Color, LED, End modules
Blue, amber, red or blue/amber
Color, LED, Inboard modules
Blue/amber, blue/red. Blue/white, white/amber, blue/green,
red/empty, white/empty, empty/amber, blue/empty or
red/amber
Cable
4.5 m
Voltage
12
-
24 V
DC
Power consumption
20 A with peak at 30 A
for less than 50 ms
Length
930, 1100, 1270, 1440, 1600, 1770 or 1940 mm
Height
Corner module: 65 mm
Inboard module: 47 mm
Width
280 mm
Interface
CAN bus of a Standby Control System or break out box
Operating temperature
-
40°C
–
+85°C
Approvals
ECE R6, ECE R7, ECE R10, ECE R65, ICAO
Parts Overview
A.
Front
B.
Rear
1.
Front module
2.
Rear module
3.
Corner module
4.
Alley right
5.
Aerodynamic cover
6.
T
-
rail
4.5 m cable / Cannon connector
(optional)
Controllpanel with fixingsystem
!

Standby W3 Specifications

General

Brand	Standby
Model	W3
Category	Automobile Accessories
Language	English

Summary

Safety Information

High Intensity LED Warning

Warning regarding high intensity LED devices and preventing eye damage from direct light beam exposure.

Technical Specifications

Technical Data Attributes

Details key technical attributes including lens, color, voltage, power, dimensions, interface, and approvals.

Product Overview

Parts Identification

Overview of the lightbar's components, including front/rear modules, corner modules, and covers.

Lightbar Dimensions

Dimensional Drawings

Illustrates the lightbar's physical dimensions, including length, width, and height of modules.

Connectivity and Functions

Breakout Box Connections

Details the functions, inputs, and cable colors for connecting the W3 Lightbar via a breakout box.

Wiring and Connections

Wire Color Functions

Explains the functions and connection points for the black, red, yellow, and green wires.

Installation Guide

General Installation Recommendations

Provides general recommendations and steps for mounting the lightbar using fixing screws and brackets.

Cannon Connector Installation Option

Details the optional installation procedure for the Cannon connector and its cable attachments.

Maintenance Procedures

Cleaning and Care

Guidelines for cleaning the lightbar using mild shampoo, high-pressure cleaners, and avoiding degreasers.