StandDesk PRO - Tools and Parts Identification; Required Tools; Desk Components; Hardware Components

TOOLS
TOOLS REQUIRED
4mm Hex Bit (Optional)Phillips Head Screwdriver Power Drill (Optional) Tape Measure
COMPONENTS
Legs Support Braces (x2) Middle Slats
Control Box Holder
Feet (x2)
Control Box
Standard HandsetStabilizing Foot Plates (x2)
HARDWARE
P1
P5
P9
P6 P7 P8
P2 P3 P4
Cable Management TrayPower Cords (x3) Crossbar
P10 P11
OPTIONAL UPGRADES
P12
(REPLACES STANDARD HANDSET IF ORDERED)
Memory Handset
H1 H7 H8 H9
M6x35 (x8)M6x25 (x4)M6x12 (x14)
Anti-slip Anti-slip Anti-slip
Allen Wrench
H3
H5 H6
H4
ST3.5x16 (x2)
Inserts (x2)Washers (x4)
ST4.8x16 (x6)
H2
M6x12 (x4)