EasyManua.ls Logo

Standex Master-Bilt B-SERIES User Manual

Standex Master-Bilt B-SERIES
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
5/16 Rev. B 57-02497
Condensing Unit and
Refrigeration System
Installation & Operations Manual
908 Highway 15 North
New Albany, MS 38652
Phone: 800-684-8988
Fax: 800-232-3966
www.master-bilt.com
©2015 Master-Bilt
Products, an unincorporated division of Standex International Corporation.
All rights reserved.
Question and Answer IconNeed help?

Do you have a question about the Standex Master-Bilt B-SERIES and is the answer not in the manual?

Standex Master-Bilt B-SERIES Specifications

General IconGeneral
SEER RatingUp to 16 SEER
RefrigerantR-410A
HSPF RatingUp to 9.0 HSPF
Dimensions (H x W x D)Varies by model
WeightVaries by model

Summary

Introduction

Qualified Personnel for Installation and Service

Emphasizes that installation and service must be done by qualified professionals.

Safety Warnings and Labels

Installation Preparation and Handling

Evaporator Coil Installation

Evaporator Drain Line Installation

Electrical and Refrigerant Piping Installation

Electrical Wiring and Refrigerant Piping Standards

Instructions for electrical connections and refrigerant piping.

System Leak Check and Evacuation

Leak Check and Evacuation Procedures

Steps for leak checking and achieving proper system vacuum.

Refrigerant Charging Procedures

Preliminary Steps and Remote Unit Charging

Initial checks and procedures for charging M-Series and B-Series remote units.

Pre-Charged System Installation

System Testing and Validation

Final Check List for All Models

R-404A Suction and Liquid Line Sizing

R-404A Suction and Liquid Line Sizing (Continued)

Equivalent Length Allowance and Line Installation

Low Ambient Operation Charge Adjustment

Low Ambient Charge Chart

Condensing Unit Specifications

Related product manuals