Standex MSLZ0151B - User Manual

5/16 Rev. B 57-02497
Condensing Unit and
Refrigeration System
Installation & Operations Manual
908 Highway 15 North
New Albany, MS 38652
Phone: 800-684-8988
Fax: 800-232-3966
www.master-bilt.com
©2015 Master-Bilt Products, an unincorporated division of Standex International Corporation.
All rights reserved.

Summary

WARNING LABELS AND SAFETY INSTRUCTIONS

MASTER-BILT REFRIGERATION NOMENCLATURE

PRE-INSTALLATION INSTRUCTIONS

INSTALLATION INSTRUCTIONS

Condensing Unit Handling and Placement

Evaporator Coil and Drain Line Installation

Electrical, Piping, and Leak Check

Procedures for electrical connections, refrigerant piping, and leak testing.

Evacuation, Charging, and Start-Up

Steps for system evacuation, charging, and initial start-up procedures.

Pre-Charged Remote Systems Installation

Installation procedures for pre-charged remote refrigeration systems.

Final Check List for All Models

R-404 A SUCTION AND LIQUID LINE SIZES

LOW AMBIENT OPERATION CHARGE

CONDENSING UNIT SPECIFICATIONS

UNIT BASE SPECIFICATIONS

Standex MSLZ0151B Specifications

General

Brand	Standex
Model	MSLZ0151B
Category	Heat Pump
Language	English