To Next PageTo Next Page
Need help?Do you have a question about the Standex MCLZ120RC and is the answer not in the manual?
Employer's responsibility to ensure staff familiarity with safety information and procedures.
Guidelines for safely handling and positioning condensing units to prevent damage.
Recommendations for safely handling and installing evaporator coils in walk-in coolers/freezers.
Instructions for installing evaporator drain lines, including material and pitch requirements.
Guidelines for connecting electrical power supply to the condensing unit.
Procedures for installing refrigerant piping, including material and brazing techniques.
Procedure for leak checking the refrigeration system using nitrogen and refrigerant.
Steps for evacuating the system to remove moisture and preparing for start-up.
Detailed steps for charging the refrigeration system with refrigerant and verifying operation.
Technical installation instructions for pre-charged remote refrigeration systems.
General| Cooling Capacity | 12000 BTU/H |
|---|---|
| HSPF | 9 |
| Heating Capacity | 12000 BTU/H |
| Refrigerant | R410A |
| Power Supply | 208-230V/60Hz/1Ph |
