To Next PageTo Next Page
Need help?Do you have a question about the Standex MHHX0301C and is the answer not in the manual?
Covers proper techniques for handling and positioning condensing units to prevent damage and ensure airflow.
Provides instructions for installing evaporator drain lines, emphasizing material, pitch, and trap requirements.
Guides on matching power supply, wiring diagrams, and safe electrical hook-up procedures.
Details refrigerant piping requirements, including tubing grade, installation, and brazing practices.
Explains the necessary steps to perform a thorough leak check of the complete refrigeration system.
Details the critical process for dehydrating and starting up the refrigeration system.
Covers installation steps for pre-charged remote refrigeration systems, including line connection.
Lists the condenser internal volume in pounds for various Master-Bilt unit models.
Chart to determine condenser flooding percentage based on ambient and suction temperatures for low ambient operation.
General| Model | MHHX0301C |
|---|---|
| Category | Heat Pump |
| Manufacturer | Standex |
| Phase | 1 |
| SEER Rating | 16 |
| Voltage (V) | 208/230 |
| HSPF Rating | 9 |
| Refrigerant Type | R410A |
