Stanley Dura-Max 5400 Series - Attachment 5: Troubleshooting Aid for Terminal Pins

iQ Control Box
01.25.2019
1.800.7.ACCESS • www.stanleyaccess.com • Document # 204144 REV B 35
Copyright 2019, Stanley Access Technologies, LLC. All rights reserved. Reproduction
in whole or in part without the express written permission of Stanley is prohibited.
Attachment 5
Troubleshooting Aid (Sheet 1 of 1)
Terminal and Pin Descripon State
TB1-8 Solenoid Lock Output Dark = Unlocked
w/o PCB, fail secure Dark = Unlocked
w/o PCB, fail safe Dark = Locked
Rotary Function Switch States for TB2
Hold
Open
Closed
Locked
Automac One Way Reduced Reduced
One Way
TB2-1
TB2-3
TB2-5 Don’t Care Don’t Care
TB2-7
Rocker Function Switch States for TB2
Hold
Open
Closed
Locked
Automac One Way Reduced Reduced
One Way
TB2-1
TB2-3
TB2-5 Don’t Care Don’t Care
TB2-7 Don’t Care Don’t Care
Terminal and Pin Descripon State
TB3-4 Stanguard
TM
Input/Output Dark = triggered or detecng
TB3-8 & TB4-8
Non-Monitored Holding Beam Input Input
and Outside Sensor (connected internally)
Dark = detecng
TB3-9 Breakout Input Dark = no breakout
TB4-4 & TB4-9
Inside Sensor Input and
Push Plate Input (connected internally)
Dark = detecng
TB4-8 & TB3-8
Inside Presence Sensor Input and
Holding Beam Input (connected internally)
Dark = detecng
TB4-9 & TB4-4
Push Plate Input and
Inside Sensor Input (connected internally)
Dark = detecng
TB5-3 Side Screen Sensor Input Dark = detecng
TB5-7 Closed-Door Posion Switch Input Dark = closed
TB5-10 Spare
TB6-1 Monitored Beam Upper Holding Beam Dark = unobstructed White = detecng
TB6-3
Monitored Beam Lower Holding Beam
Dark = unobstructed White = detecng
TB6-5 Photo Beam Pro Test Output Dark = tesng
TB6-7 Sensor Test Output Dark = normal operaon
NOTE: Black color indicates a low signal (Approx. 0 VDC).