13
ENGLISH
battery performance and life, store battery packs at room
temperature when not inuse.
2. For long storage, it is recommended to store a fully charged
battery pack in a cool, dry place out of the charger for
optimalresults.
NOTE: Battery packs should not be stored completely
depleted of charge. The battery pack will need to be recharged
beforeuse.
Labels on Charger and Battery Pack
In addition to the pictographs used in this manual, the labels
on the charger and the battery pack may show the following
pictographs:
Read instruction manual beforeuse.
See Technical Data for chargingtime.
Do not probe with conductiveobjects.
Do not charge damaged batterypacks.
Do not expose to water.
Have defective cords replacedimmediately.
Charge only between 4 ˚C and 40 ˚C.
Only for indooruse.
Discard the battery pack with due care for
theenvironment.
Charge battery packs only with designated
chargers. Charging battery packs other than the
designated batteries with a charger may make
them burst or lead to other dangeroussituations.
Do not incinerate the batterypack.
Battery Type
The SFMCPS620 operates on a 18 volt batterypack.
These battery packs may be used: SFMCB202, SFMCB204,
SFMCB206. Refer to Technical Data for moreinformation.
Date Code Position (Fig. A)
The date code
20
, which also includes the year of manufacture,
is printed into thehousing.
Example:
2020 XX XX
Year of Manufacture
Package Contents
The package contains:
1 Pole saw
1 Shoulder strap
1 Instruction manual
1 Li‑Ion battery pack**
1 Li‑Ion battery charger**
**Included with SFMCPS620M1 Only
• Check for damage to the tool, parts or accessories which may
have occurred duringtransport.
• Take the time to thoroughly read and understand this manual
prior tooperation.
Markings on Tool
The following pictograms are shown on the tool:
Read instruction manual beforeuse.
Wear eyeprotection.
Wear earprotection.
Do not leave inrain.
Wear headprotection.
Wear protectivegloves.
Cut hazard. Keep fingers away fromslot.
Wear protectivefootwear.
Rotational direction of the sawchain.
Electrocution hazard. Keep at least 10 m away from
overheadlines.
Switch the tool off. Before performing any maintenance
on the tool, remove the battery from thetool.
Directive 2000/14/EC guaranteed soundpower.
Keep bystandersaway.