9
ENGLISH
(Original instructions)
Maintenance
Your STANLEY FAT MAX tool has been designed to operate
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
u Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth.
u Do not use any abrasive or solvent-based cleaner.
Protecting the environment
Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
SFMCD711
Voltage V
DC
18V
No-load speed Min
-1
0-350/0-1500
Max. torque Nm
48
Chuck capacity mm
13
Max Drilling capacity
Steel/wood/masonry mm
13/35/13
Weight kg
1.2
Charger SFMCB11 SFMCB12 SFMCB14
Input Voltage
V
AC
230 230 230
Output Voltage
V
DC
18 18 18
Current A 1.25 2 4
Battery
SFMCB201 SFMCB202 SFMCB204 SFMCB206
Voltage V
DC
18 18 18 18
Capacity Ah
1.5 2.0 4.0 6.0
Type
Li-Ion Li-Ion Li-Ion Li-Ion
Level of sound pressure according to EN60745:
Sound pressure (L
pA
) 86.5 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 97.5 dB(A), uncertainty (K) 3 dB(A)
Vibration total values (triax vector sum) according to EN60745:
Drilling into metal (a
h, D
) 2.1 m/s
2
, uncertainty (K) 1.5 m/s
2
Impact drilling (a
h, ID
) 10.1 m/s
2
, uncertainty (K) 1.5 m/s
2
EC declaration of conformity
MACHINERY DIRECTIVE
%
SFMCD711 - Impact drill
Stanley Fat Max declares that these products described under
EN60745-1:2009+A11:2010, EN60745-2-1:2010.
These products also comply with Directive 2006/42/EC,
2014/30/EU and 2011/65/EU. For more information, please
contact Black & Decker at the following address or refer to the
back of the manual.
For more information, please contact Stanley Fat Max at the
following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
le and makes this declaration on behalf of
Stanley Fat Max.
A.P. Smith
Technical Director
Stanley Fat Max Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
04/06/2019
Guarantee
Stanley Fat Max is confident of the quality of its products and
offers consumers a 12 month guarantee from the date
of purchase. This guarantee is in addition to and in no way
prejudices your statutory rights. The guarantee is valid within
the territories of the Member States of the European Union
and the European Free Trade Area.