Stanley PB2500 - Setting Counter Values

13
ENGLISH
2.4 MAIN COMPONENTS LIST (for complete tool explosion and Bill of Material please see
service manual)
PB2500 Smart drawing can be found inside the front cover
A
Nose pieces
M
Changer lamp
B
Nose housing
N
Charger
C
Nose housing nut
O
Battery charger connection
D
Collector lock
P
Jaw guide
E Collector shutter Q Jaws
F Hook accessory attachment R Jaw pusher assembly
G
Motor housing
S
Jaw pusher spring
H
Exhaust vent
T
Pulling head
I
Handle
U
Front clutch
J
Switch
W
Collector space
K
Battery pack
Y
Rivet
L
Manual
2.5 OPTIONAL ACCESSORIES
WARNING: Since accessories, other than those offered by STANLEY Engineered Fastening have not been
tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of
injury, only STANLEY Engineered Fastening recommended accessories should be used with this product.
Consult your dealer for further information on the appropriate accessories.
WARNING: To reduce the risk of serious personal injury, disconnect battery pack before making any
adjustments or removing/installing attachments or accessories.
For a complete list of nose equipment and other accessories available for the PB Series, please visit our website
http://www.stanleyengineeredfastening.com/resource-center/document-library