13
ENGLISH
(Original instructions)
EC declaration of conformity
MACHINERY DIRECTIVE
SCD20-Drill/Screwdriver
STANLEY declares that these products described under
"technical data" are in compliance with: 2006/42/EC,
EN 60745-1:2009 + A11:2010, EN 60745-2-1:2010
These products also comply with Directive 2004/108/
EC (until 19/04/2016) 2014/30/EU (from 20/04/2016)
and 2011/65/EU. For more information, please contact
STANLEY at the following address or refer to the back
of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY.
R.Laverick
Engineering Manager
STANLEY , Europe, Egide Walschaertsstraat14-18,
2800 Mechelen, Belgium
08.2015
To Next Page
Loading...
Need help?
General