Stanley SCD20C2 User Manual

12
ENGLISH
(Original instructions)
Technical Data
SCD20
Voltage V 18
No-load speed/rated
speed min
-1
(rpm) 0-350
0-1500
Max torque Nm 29.4
Power output(MWO) W 283
Chuck capacity mm 13
CHARGER SC201/ SC202
Input Voltage V
AC
220-240
Output Voltage V
DC
18
Output Current(DC) A 1.0/ 2.0
Approx. charge time min 75/ 45
Battery SB20C
Voltage V
DC
18
Capacity Ah 1.3
Type Li-Ion
LEVEL OF SOUND PRESSURE ACCORDING TO
EN 60745:
Sound pressure (LpA) 71.5 dB(A), uncertainty (K) 3 dB(A)
Sound power (LWA) 82.5 dB(A), uncertainty (K) 3 dB(A)
VIBRATION TOTAL VALUES (TRIAX VECTOR
SUM) ACCORDING TO EN 60745:
Drilling into metal (ah, D) 3.5 m/s2, uncertainty (K) 1.5 m/s2
No load (ah, S) 1.0 m/s2, uncertainty (K) 1.5 m/s2
VIBRATION
The declared vibration emission values stated in the
technical data and the declaration of conformity have been
measured in accordance with a standard test method
provided by EN 60745 and may be used for comparing one
tool with another. The declared vibration emission value
may also be used in a preliminary assessment of exposure.
WARNING! The vibration emission value during actual
use of the power tool can differ from the declared value
depending on the ways in which the tool is used. The
vibration level may increase above the level stated.
When assessing vibration exposure to determine safety
measures required by 2002/44/EC to protect persons
regularly using power tools in employment, an estimation of
vibration exposure should consider, the actual conditions of
use and the way the tool is used, including taking account of
all parts of the operating cycle such as the times when the
tool is switched off and when it is running idle in addition to
the trigger time.
SERVICE INFORMATION
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service Centers
are staffed with trained personnel to provide customers
with efcient and reliable power tool service. For more
information about our authorized service centers and
if you need technical advice, repair, or genuine factory
replacement parts, contact the STANLEY location nearest
you.
TWO YEARS WARRANTY
If your STANLEY product becomes defective due to faulty
materials or workmanship within 24 months from the date
of purchase, STANLEY guarantees to replace all defective
parts free of charge or – at our discretion – replace the unit
free of charge provided that:
• The product has not been misused and has been used in
accordance with the instruction manual.
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorised
• Proof of purchase is produced.
• The STANLEY product is returned complete with all
original components. If you wish to make a claim, contact
your seller or check the
location of your nearest authorised STANLEY repair agent
in the STANLEY catalogue or contact your local STANLEY
ofce at the address indicated in this manual. A list of
authorised STANLEY repair agents and full details of our
after sales service is available on the internet at:
www.stanleytools.com

Stanley SCD20C2 Specifications

General

Brand	Stanley
Model	SCD20C2
Category	Drill
Language	English