Stanley SDH600 User Manual

7
(Original instructions) ENGLISH
Technical data
Input voltage V
AC
220-240 220-240
Power input W 600 700
Frequency Hz 50/60 50/60
No-load speed min
-1
0-2900 0-2900
Impact rate ipm 49300 49300
Chuck capacity mm 1.5-13 1.5-13
Max.Drilling Capacity
Concrete/Metal/Wood mm 13/13/25 13/13/30
Weight kg 1.75 1.87
SDH600 SDH700
Protecting the environment
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY product needs
replacement, or if it is of no further use to you, do not
dispose of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packag ing
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand for raw
materials.
Local regulations may provide for separate collection of
etsaw lapicinum ta ,dlohesuoh eht morf stcudorp lacirt cele
sites or by the retailer when you purchase a new product.
STANLEY provides a facility for the collection and recycling
of STANLEY products once they have reached the end of
their working life. To take advantage of this service please
return your product to any authorised repair agent who will
collect them on our behalf.
You can check the location of your nearest authorised repair
agent by contacting your local STANLEY office at the
address indicated in this manual. Alternatively, a list of
authorised STANLEY repair agents and full details of our
after-sales service and contacts are available on the Internet
at: www.2helpU.com
One year warranty
If your STANLEY product becomes defective due to faulty
materials or workmanship within 12 months from the date of
purchase, STANLEY guarantees to replace all defective
parts free of charge or – at our discretion – replace the unit
free of charge provided that:
• The product has not been misused and has been used in
accordance with the instruction manual;
• The product has been subject to fair wear and tear;
• Repairs have not been attempted by unauthorized
persons;
• Proof of purchase is produced;
• The STANLEY product is returned complete with all
original components;
• The product hasn’t been used for hire purposes.
If you wish to make a claim, contact your seller or check the
location of your nearest authorised STANLEY repair agent in
the STANLEY catalogue or contact your local STANLEY
office at the address indicated in this manual. A list of
authorised STANLEY repair agents and full details of our
after sales service is available on the internet at:
www.2helpU.com

Stanley SDH600 Specifications

General

Brand	Stanley
Model	SDH600
Category	Drill
Language	English