Stanley SM18 User Manual

25
ENGLISH
properly. Ensure that chips, dust or workpiece particle
cannot lead to blockage of one of the functions.
In case of workpiece fragments jammed between saw
blade and guards disconnect the machine from the
power supply and follow the instructions given in section
Mounting the Saw Blade. Remove the jammed parts and
reassembling the saw blade.
WARNING: Blow dirt and dust out of the main
housing with dry air as often as dirt is seen
collecting in and around the air vents. Wear
approved eye protection and approved dust
mask when performing this procedure.
WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the
materials used in these parts. Use a cloth
dampened only with water and mild soap. Never
let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
WARNING: To reduce the risk of injury,
regularly clean the table top.
WARNING: To reduce the risk of injury,
regularly clean the dust collection system.
To maintain products SAFETY and RELIABILITY,
repair, carbon brush inspection and replacement, any
other maintenance or adjustment should be performed
by STANLEY Service Centers, always using Stanley
replacement parts.
OPTIONAL ACCESSORIES
WARNING: Since accessories, other than those
offered by STANLEY, have not been tested with
this product, use of such accessories with this
tool could be hazardous. To reduce the risk of injury, only
STANLEY, recommended accessories should be used
with this product.
Consult your dealer for further information on the
appropriate accessories.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY product
needs replacement, or if it is of no further use to you, do
not dispose of it with household waste. Please sort it out
for separate recycling.
Separate collection of used products and packaging
allows materials to be recycled and used again. Re-
use of recycled materials helps prevent environmental
pollution and reduces the demand for raw materials.
NOTES
STANLEY’s policy is one of continuous improvement to
our products and as such, we reserve the right to change
product specifications without prior notice.
Standard equipment and accessories may vary by country.
Product specifications may differ by country.
Complete product range may not be available in all
countries. Contact your local STANLEY dealers for range
availability.
SERVICE INFORMATION
STANLEY offers a full network of company-owned and/
or authorized service agents throughout your country.
All STANLEY Service Centers are staffed with trained
personnel to provide customers with efficient and reliable
power tool service. Whether you need technical advice,
repair, or genuine factory replacement parts, contact the
STANLEY location nearest to you.
TECHNICAL DATA
MITRE SAW SM18
B1 KR A9 TW
Voltage
V
AC
220~240 220 220 110
Frequency Hz 50-60 60 50 60
Power input W 1800
Blade diameter mm 254
Blade kerf thickness mm 2.8
Bore diameter mm 25.4
Max.blade speed min
-1
4800
Mitre (max. positions) left
right
47°
52°
Bevel (max. positions) left
right
45°
45°
0°mitre,0°bevel 92mm x 285mm /
80mm x 310mm
45°mitre,0°bevel 92mm x 190mm /
80mm x 210mm
0°mitre,
45°bevel
left
47mm x 285mm /
45mm x 310mm
45°mitre,
45°bevel
left
47mm x 190mm /
45mm x 210mm
0°mitre,
45°bevel
right
35mm x 285mm /
25mm x 310mm
45°mitre,
45°bevel right
35mm x 190mm /
25mm x 210mm
Automatic blade
brake time
sec <10.0
Weight kg 18.6

Stanley SM18 Specifications

General

Brand	Stanley
Model	SM18
Category	Saw
Language	English