Stanley SW22 - Further Troubleshooting; Detergent Delivery Problems; Water Escape from Valve

TSS versions only: No water delivery
when gun trigger is depressed
(With supply hose connected)
Nozzle clogged Clean nozzle (Fig. E)
No detergent sucked in
Adjustable nozzle on high pressure setting
set nozzle
(2) on “ ” setting (Fig.C)
Detergent too dense Dilute with water
High pressure hose extension being used Fit original hose
Deposits or restriction in detergent circuit
Flush with clean water and eliminate any
restrictions. If the problem persists, contact an
Authorized service Centre
Water escapes from thermo- stat valve
Water temperature inside pump head
has exceeded max. rated value stated on
nameplate
With appliance in operation, do not stop the water
jet for more than 5 minutes at a time
ENGLISH
12