Stanley SXAE00025 User Manual

5
Charging current for batteries: from 4Ah to 30Ah.
Maintenance mode for batteries: from 4Ah to 70Ah.
Charging current for batteries: from 30Ah to 80Ah.
Maintenance mode for batteries: from 30Ah to 120Ah.
Type of battery:
Mode for charging WET or GEL batteries.
Type of battery:
Mode for charging AGM-START&STOP, AGM-SPIRAL or WET batteries with
temperatures below 5°C.
Reverse polarity: the positive and negative terminals of the outlet lead are not
connected correctly to the battery.
Issue with the battery.
Battery charge level.
Shows the battery voltage, charging voltage, “FUL” when battery is charged and
error indication when issue with battery.
2.2. Technical specifications
Reference
SXAE00025 / SXAE00025GB
Model
Charger 6/12V-4A
Voltage (Mains)
220~240V AC 50/60Hz
Charging voltage
6V / 12V
Charging current
1A / 4A
Battery size
4Ah to 120Ah batteries
Operating temperature
-10° to +40°C
Storage temperature
-20° to +50°C
IP indication
IP65
Minimum battery voltage
0,8V
2.3. Battery types
This electronic battery charger is designed to charge all types of lead batteries, conventional batteries
and batteries of the latest generation. This battery charger is ideal for both everyday use, as a key
working tool, and extensive charging cycles. All charging parameters are set using the charge function
key on the control panel.
2.4. Charge cycles
The charge cycles of the battery charger have been specially developed to optimize the charge of all
types of batteries currently available in the market. The numerous constructional technologies of
currently available batteries require different charging curves to ensure correct and complete
charging. This battery charger extends the lives of your batteries because it provides each with the
proper charge cycle.

Stanley SXAE00025 Specifications

General

Brand	Stanley
Model	SXAE00025
Category	Battery Charger
Language	English