EasyManua.ls Logo

Stanley SXVC30XTDE - Troubleshooting and Compliance; Problem Diagnosis and Solutions

Stanley SXVC30XTDE
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
13
(Original instructions)
EN © 2016 English
(Original instructions)
EN © 2016 English
10
TROUBLESHOOTING
Problems Probable causes Remedies
The appliance does not switch on
No electrical power
Check that the plug is firmly in the socket and that the mains
voltage supply is present (*)
Problems with the electric-electronic circuit Contact the Service Centre
The appliance does not suck in
material, or sucks only weakly
Accessories fouled Check and clean the nozzles, extensions or hoses
Filters dirty Clean the filters
Bags full Empty / change bags
Tank full Empty the tank
Power tool does not start (where power
tool socket is featured)
Power tool plug not fitted into vacuum cleaner socket correctly Fit the plug properly
Switch off or turned to I Turn switch to power tool/II position
Dust comes out of appliance
Filter not fitted Fit the filter
Filter damaged Replace the worn filter with a new one
Hose or connections damaged Replace damaged parts
Bad smells from appliance when in
operation
Filters dirty Replace filters
(*) If the motor stops and does not restart during operation contact the Authorised Service Centre.
EC Declaration of conformity
We, Annovi Reverberi S.p.A, of Bomporto (Modena), Italy, declare that the following Stanley appliance(s):
Designation of appliance: Wet&dry vacuum cleaner
Model No.: SXVC20PE SXVC20PTE SXVC20XTE SXVC30XTDE SXVC35PTDE SXVC50XTDE
Rated power: 1.2 kW 1.2 kW 1.4 kW 1.6 kW 1.6 kW 1.6 kW
is (are) compliant with the following European directives:
2006/95/EC – Directive to be replaced by 2014/35/EU from April 20, 2016,
2004/108/EC – Directive to be replaced by 2014/30/EU from April 20, 2016, 2011/65/EU, 2005/32/EC, 2012/19/EU.
and was (were) produced in compliance with the following norms or standardised documents:
EN 60335-1; EN 60335-2-2; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3; EN 62233; EN 50581; Reg.1275/2008.
Name and address of the person responsible for issuing the technical file: Stefano Reverberi / AR Managing Director
Via ML King, 3 - 41122 Modena, Italy
Date: 10.02.2016
MODENA (I)
Stefano Reverberi Managing Director

Other manuals for Stanley SXVC30XTDE

Related product manuals