Stanton RM-THREE User Manual

RM THREE Professional performance mixer
OWNER’S M A N U A L
FADER CLE A N I N G
The RM THREE faders may need lubrication from time to time. This will extend
the fader life and eliminate any potential damage due to extended heavy usage.
Cleaning Instructions
1. Remove the fader to be cleaned by unscrewing the outer screws (removing
the 2 inner screws will detach the fader from the fader plate) and disconnecting
the cable coming from the mixer.
2. Spray a small amount of cleaner or lubricant into both ends of the fader and
slide the fader back and forth a few times to spread the fluid evenly throughout
the fader.
3. Shake and wipe off excess fluid before re-assembling the fader.
FADER R EPL AC E M E N T
To replace the cross or channel faders, follow step 1 of the cleaning instructions.
Replacement parts are available from Stanton or your local Stanton dealer.
LF-RM3 Channel input fader
CF-RM3 Crossfader
PS-18US US Power Supply (110v)
PS-18EU European Power Supply (220v)
PS-18UK UK only Power Supply (240v)
© 1999, Stanton Magnetics, LLC

Stanton RM-THREE Specifications

General

Channels	3
EQ	3-band EQ per channel
USB	No
Crossfader	Replaceable
Power Supply	External

Summary

FADER CLEANING

FADER REPLACEMENT

TROUBLESHOOTING

DESCRIPTION OF FUNCTIONS

Microphone Inputs and Controls

Covers main mic input, mic 2 input, mic level, and mic EQ adjustments.

Channel Input and EQ Controls

Includes input selectors, gain, and EQ for individual channels.

Channel Faders and Crossfader

Details operation of channel output level faders and the main crossfader.

Master and Headphone Monitoring

Describes master output level control and headphone monitoring functions.

Effect and Cueing Controls

Explains how to manage effect sends and channel cueing.

Other Controls and Indicators

Covers frequency kill switches, power indicator, and level meters.

TECHNICAL SPECIFICATIONS

WARRANTY