Software Manual
9
1.3. Adding a Printer (TSP100LAN)
Prior to installation, use an Ethernet cable to connect the printer and an access point that can connect to
the same network the PC that will be used for configuration is on. For details, see the
Hardware manual.
Notes:Printer addition requires computer's administrator privileges.
1.3.1. Printer LAN Settings
(1) Turn the TSP100 futurePRNT on.
(2) From the Windows Start menu, select “Programs (All Programs)” - “StarMicronics” - “Star
TSP100” - “Ethernet Setup Tool”.
(3) "User Account Control" window will appear. Click "Yes".
(4) If the "Windows Security Alert" screen is displayed, click [Allow access].
Notes: If you click [Cancel], you will not be able to search for the LAN printer.
To Next Page
Loading...