Software Manual
47
3.2.2. User-Defined Paper Size
Follow the steps below to specify a user-defined paper size using a Windows standard function.
(1) In Control Panel, select “Devices and Printers”.
(2) Select a target printer, and click "Print Server Properties".
(3) Click the "Forms" tab.
(4) Check the "Create a new form" checkbox.
(5) Change the name currently displayed in the ‘Form name’ field, and specify a new name.
(6) Select the units of measurements (either Metric or English) in the ‘Form description’ field.
Then, enter the desired value in "Width" and "Height" under Paper size.
(7) Click “Save Form”. Click “OK” to close the window.
Notes:
The allowable paper sizes are as follows.
A user-defined paper size must be created in the range shown below.
Paper width: 25.4 to 72mm
Paper length: 25.4 to 3,276mm
③
⑤
④
⑥
⑦
To Next Page
Loading...