Software Manual
59
Description data: E2A0* 012345ABCDP
Description character Setting font Meaning
(1) ‘E2’ QR_CNTL Sets to correct errors level Q (25%).
(2) ‘AO’ QR_CNTL QR Code data setting (Automatic data analysis)
(2) ‘*’ DATA1 QR Code data setting parameter
A = ￥x0A = ‘*’ *１
(2) ‘ ’ DATA1 QR Code data setting parameter
0 = ￥x00 = ‘ ‘ (Space character) *1
(2) ‘012345ABCD’ ESC_FONT 2D code data
(4) ‘P’ QR_CNTL QR code printing
*1 Describe "0A", which indicates the number of bytes (10 bytes) of 2D code data in
hexadecimal notation, in the low-order byte (A) and high-order byte (0) respectively.
Printing result:
3.6.2. 2D Code Command Setting Font
QR code setting fonts (QR_CNTL)
QR_CNTL Fonts Function Output Code
0 Use for Parameter \x00
1 Use for Parameter \x01
2 Use for Parameter \x02
3 Use for Parameter \x03
4 Use for Parameter \x04
5 Use for Parameter \x05
6 Use for Parameter \x06
7 Use for Parameter \x07
8 Use for Parameter \x08
9 Use for Parameter \x09
M Set model of QR code \x1b\x1dyS0
To Next Page
Loading...