Software Manual
17
1.4. Adding a Printer (TSP100IIIW)
This manual describes how to connect the printer using WPS.
If you are using Windows 7, you can also connect over an Ad-Hoc network. For details, see the
Online
manual (Setup - Connect Tablet/PC).
Notes:Printer addition requires computer's administrator privileges.
1.4.1. Printer LAN Settings
(1) Turn the TSP100 futurePRNT on.
(2) Use WPS to connect the printer to the network.
Set your wireless access point to wait for a WPS connection, and then hold down the PAIR
button on the rear of the printer until the printer LED (blue) blinks.
When the WPS connection is made, the printer LED (blue) stops blinking and stays lit.
For details on WPS connections, see the TSP100IIIW Online manual (Setup -
Connecting with a Tablet/PC)
.
(3) From the Windows Start menu, select “Programs (All Programs)” - “StarMicronics” - “Star
TSP100” - “Ethernet Setup Tool”.
(4) "User Account Control" window will appear. Click "Yes".
To Next Page
Loading...