Star Micronics TSP100IIILAN - 2 D Code Printing Function

Software Manual
53
3.4.2. Control Font Usage
Usage of the Control font must be done as follows:
- Select Control Font
- Input Control Font
Please set the control font's character size to the standard value (8.5 points).
1. Choose the control font from
your editor’s font menu.
2. Enter the characters for the printer actions
which you want to use.
The specified function is performed by
printing.
Example;
Enter ‘A’: Open cash drawer 1 for 50 mSec.
Enter ‘P’: Partial Cut