Star Micronics TSP100IIILAN - Page 49

Software Manual
44
Buzzer2 - Repeat
If the Peripheral Unit Type is set to Buzzer, this setting selects the number of beeps produced by
buzzer #2 when it is activated. (Each beep will sound for the specified ON time, followed by silence for
the specified OFF time). Note that you can force the buzzer off at any time by pressing the [FEED]
button.
Value Default Details
1
*
1 beep
2 2 beeps
3
3 beeps
5
5 beeps
10 10 beeps
15
15 beeps
20 20 beeps