Star Micronics TSP654II - Pairing the printer via Bluetooth; Enable Bluetooth on iPad; Initiate Printer Pairing; Connect to Printer

Pairing the printer via Bluetooth
1 Ensure that Bluetooth has been enabled on the iPad by going to Settings
and making sure that Bluetooth is ON.
2 Turn on the printer by toggling the power switch.
3 In order to pair the printer with the iPad, you’ll need to reach behind the
printer to access the PAIR button. Press and hold the PAIR button for about
5 seconds, and you should see the LED light start ashing green.
4 On the iPad, look for the printer in the Bluetooth Devices list. The name is:
“Star Micronics”. Tap on the name and the iPad should pair.
5 To conrm successful pairing, you should see that the printer is “Connected”
in the Bluetooth Devices list.