Star Micronics TSP100LAN User Manual

TSP100LAN
Hardware Manual

Star Micronics TSP100LAN Specifications

General

Print Technology	Direct Thermal
Print Width	72 mm
Resolution	203 dpi
Weight	1.5 kg
Auto Cutter	Yes
Printer Type	Thermal Printer
Connectivity	LAN (Ethernet)
Paper Type	Thermal Paper
Print Speed	250 mm/s (9.8 inches/s)

Summary

1. Unpacking and Installation

Installation and Operational Warnings

Critical warnings related to printer installation and safe operation.

3. Setup

3-1. Connecting the Ethernet Cable to the Printer

Instructions for connecting the Ethernet cable to the printer.

3-2. Connecting to a Peripheral Unit

Details on connecting peripheral units using a modular plug.

3-3. Loading the Paper Roll

Step-by-step guide for loading the paper roll into the printer.

3-4. Connecting the Ethernet Cable to the PC

Instructions for connecting the printer's Ethernet cable to a router or switch.

3-5. Connecting the Power Cord

3-6. Turning Power On

Safety and Cautions

Cutter and Thermal Head Safety

Important safety warnings concerning the cutter blade and thermal head.

Caution Symbol Explanations

Explains the meaning of various caution symbols used on the printer.

Operational Cautions and Notes

General Operational Cautions

5. Thermal Roll Paper Specification

5-1. Roll paper specification

6. Control Panel and Other Functions

6-2. Errors

Lists and explains automatically recoverable and non-recoverable printer errors.

6-2. Errors (Continued)

6-3. Self-Printing

7. Preventing and Clearing Paper Jams

7-2. Removing Paper Jam

Step-by-step guide on how to clear a paper jam from the printer.

7-3. Releasing a Locked Cutter (Auto Cutter Mode only)

7-3. Releasing a Locked Cutter (Continued)

8. Periodical Cleaning

8-1. Cleaning the Thermal Head

Instructions for cleaning the thermal head to ensure print quality.

10. Specifications

10-1. General Specifications

11. DIP Switch Settings

DIP Switch 1 Settings

Initialize Network Settings Procedure