Star Micronics TSP600 Series User Manual

THERMAL PRINTER
TSP600 SERIES
USER’S MANUAL
MODE D’EMPLOI
BEDIENUNGSANLEITUNG
MANUALE DI ISTRUZIONI

Star Micronics TSP600 Series Specifications

General

Printing Method	Direct thermal
Print Resolution	203 dpi
Interface Options	USB, Serial, Ethernet, Bluetooth
Paper Type	Thermal paper
Emulation	ESC/POS
Print Speed	250 mm / second
Paper Width	80mm

Summary

1. Parts Identification and Nomenclature

3. Connecting Cables and AC Adapter

3-1. Interface Cable

Note that the interface cable is not provided. Please use a cable that meets specifications.

2. Consumable Parts and AC Adapter

3-2. Connecting to a Peripheral Unit

3-3. Connecting the Optional AC Adapter

3-4. Turning Power On

4. Control Panel and Other Functions

4-1. Control Panel

Details the components of the control panel, including LEDs and buttons.

4-2. Errors

Lists and explains automatically recoverable and non-recoverable error conditions.

5. Loading the Roll Paper

6. Adjusting the Near-end Sensor

7. Preventing and Clearing Paper Jams

7-1. Preventing Paper Jams

7-2. Removing Paper Jam

Provides step-by-step instructions for clearing a paper jam from the printer.

7-3. Releasing a Locked Cutter (Auto Cutter Model only)

8. Periodical Cleaning

8-1. Cleaning the Thermal Head

Instructions on how to clean the thermal head using isopropyl alcohol.

8-2. Cleaning the Paper Holder

Appendix B: Dip Switch Setting

B-1. Parallel Interface Model

Explains DIP switch settings for the parallel interface model.

B-2. Serial Interface Model

B-3. USB Interface Model

B-4. Ethernet Interface Model

Appendix G: Memory Switch Settings