Star Micronics TSP600 Series - Tear Bar Model

– 2 –
ENGLISH
Tear Bar Model
Cover open lever
Pull this lever in the
direction of the
arrow to open the
printer cover.
Control panel
Features LED indica-
tors to indicate printer
status and switches to
operate the printer.
Power switch
Used to turn on/off
power to the printer.
Power connector
For connection of
the AC adapter.
Never unplug the
AC adapter while
the printer is on.
Peripheral drive connector
Connects to peripheral
units such as cash
drawers, etc.
Do not connect this to a
telephone.
Interface connector
For connection to a
host computer.
Printer cover
Open this cover to load or
replace paper.
Roll paper
User’s manual
Ferrite core Fastener
(A model with an
RS-232C interface
is not available.)
(Included with
Parallel and
Ethernet model)
(For USB interface)
(For parallel and
Ethernet interfaces)