– 12 –
ENGLISH
Power switch
3-4. Turning Power On
Make sure that the AC adapter has been connected as described in 3-3.
(1) Set the power switch located on the front of the printer to on.
The POWER lamp on the control panel will light up.
Important!
We recommend that you unplug the printer from the power outlet
whenever you do not plan to use it for long periods. Because of this, you
should locate the printer so that the power outlet it is plugged into is
nearby and easy to access.
When an option seal is affixed to the printer above the power switch, the
ON/OFF marks of the power switch may be hidden. If this occurs, remove
the power cord from the outlet to turn the printer OFF.
To Next Page
Loading...
