Thank you for choosing Star Micronics as your provider for printing solutions.
Unpacking the Unit
Contents
a. Printer
b. Paper Shaft
c. 1” Paper Core Adapter
d. 2” Paper Core Adapter
e. Shaft Weight*
f. Interface Mounting Screws(2)*
g. Paper Core Adapter Screws(4)
*Not Pictured
Assembly – Installing the Interface
Place the interface sub-assembly into the interface
slot as shown. Take care to be sure the interface
cartridge is seated properly into its connector.
Using a #2 Phillips screwdriver, install the mounting
screws located in back of the printer.
To Next Page
Loading...
