STAR TRAC PRO STEPPER O
WNER
’
S
M
ANUAL
11
A
SSEMBLY AND
S
ETUP
The following parts are included with the STAR TRAC PRO STEPPER:
■ Pro Stepper Base frame assembly
■ Display Assembly
■ Left and right side handrails (Note: Both handrails are the same)
■ Hardware Kit 711-3182 includes:
8 handrail screws PN 110-0506
4 neck screws PN 110-3172
5/32” Hex key PN 290-0040
■ Owners Manual
■ Warranty Card
UNPACKING AND ASSEMBLY
NOTE: Inspect the shipping carton for any parts that may be missing BEFORE discarding the carton. Items can shift during
transportation, and may be accidentally discarded with the carton. If any parts are missing, please contact Star Trac Support
at 800-503-1221. Have the serial number of the Stepper, and the part number(s) of the missing parts ready so they may be
shipped to you.
1. Unpack the Shipping Carton
Remove the shipping straps from the outside of the shipping carton.
Open the top of the carton and remove the inner top cardboard.
Lift the handrail box (the long, thin box on the side) out of the shipping carton.
Step 1A
Step 1B
Step 1C
To Next Page
Loading...
