How to connect to Printer via Physical Ethernet LAN and its setup?
DolphinPOS User Guide Page 4
c) Note down the IP address from here. Example:192.168.0.48
Step4: Open the “Dolphin POS” App. Go to “Setup”
a) Enable “Star Web Print ON”
b) Put the IP address in “Printer IP”, which we got from Step3 example:
192.168.x.xxx
c) Is star Barcode Reader [Peripheral needs to be connected to 0.5A Port]
d) Is Star display unit ON [Peripheral needs to be connected to 0.5A Port]
To Next Page
Loading...
