- 5 -
Safety Precautions
Please be sure to read
To use this product in safety, please follow the precautions given below.
WARNING
PP
If you notice smoke, a strange smell, or a strange sound, turn o the power immediately, and remove the
battery pack and battery charger. en contact a Star Micronics dealer.
PP
If any foreign material (metal scraps, water, or other uid) enters the printer, immediately turn o the
printer and remove the battery charger and/or battery pack. en, contact your dealer for advice. Con-
tinued use of the printer could result in a re.
PP
Never attempt to repair the printer yourself. Also do not disassemble or modify the product.
Doing so could lead to injury, re, or electric shock.
PP
Do not touch the tear bar.
- ere is a tear bar inside the paper outlet slot. Not only should you not put your hand in the paper out-
let slot while printing is in progress, never put your hand into the outlet even when printing is not in
progress.
- e printer cover can be opened when replacing the paper. However, since the tear bar is on the inside
of the printer cover, be careful not to place your face or hands too close to the tear bar.
PP
During and immediately aer printing, the area around the thermal head is very hot.
Do not touch it, as you could be burned.
PP
If any battery pack uid gets on your skin or clothing, immediately wash the aected area with fresh
water. Otherwise, skin damage may result.
PP
e battery pack may be hot immediately aer the product has been used.
Caution Symbol
Caution for burns: The print head may be hot.
Do not touch the print head. There is a risk of burns.
Caution for static electricity: Do not touch the print head as it may be damaged by static
electricity accumulated in the human body.
To Next Page
Loading...
Need help?
General
