- 6 -
n
Using the Printer
PP
Do not use any battery charger other than the provided charger.
If a battery charger other than the specied charger is used, there is the risk of electric shock or re.
PP
Do not wire the cables in a way other than designated.
Doing so could result in a re. It may also damage other connected devices.
PP
Some semiconductors can be damaged by static electricity.
Be sure to turn o the printer when inserting or removing the battery pack.
PP
Do not drop the printer or hit it against a hard object.
PP
Do not open the printer cover while the printer is printing.
PP
Before you open the printer cover, make sure that printing data is not being sent to the printer.
PP
Do not unplug or plug in a communication cable while the printer is printing or during communication.
PP
Do not touch a communication connector while the printer is printing.
PP
Turn o the printer when you are not using it.
PP
When the printer is used in a low temperature environment or when a PIN pad or other device that needs
electricity is connected to the printer, the battery’s performance will be diminished, and the amount of time
that you can use the printer for may be reduced.
PP
Do not pull out paper while the printer cover is closed.
PP
The heating element and the driver IC of the thermal head are easily damaged. Do not touch them with
metal objects, sandpaper, etc.
PP
Printing quality may suer if the thermal head heating element becomes soiled by being touched with your
hands. Do not touch the thermal head heating element.
PP
ere is a risk of damage to the driver IC of the thermal head from static electricity.
Never directly touch the IC.
PP
Do not operate the printer if there is moisture on the front surface of the head from condensation, etc.
n
ermal Paper Handling
PP
Only use thermal paper with the designated specications.
e printing quality and working life of the thermal head cannot be guaranteed if any paper other than that
recommended is used. In particular, paper containing [Na+, K+, C1-] may drastically reduce the working
life of the thermal head. Please exercise caution.
PP
Store the thermal paper in a cool, dry, dark location.
PP
Do not rub the thermal paper with a hard object.
PP
Do not leave the thermal paper in contact with plastic lm, an eraser, or adhesive tape for a long period of
time.
PP
Do not stack the thermal paper on fresh diazo copies or wet-type copies.
PP
Do not use chemical glue on the thermal paper.
PP
Do not use thermal paper that has been stored for a long period of time.
To Next Page
Loading...
Need help?
General
