– 10 –
4-3. Installing the Printer Software
Here is the procedure for installing the printer driver and utility software, which are stored on
the supplied CD-ROM.
The procedure applies to the Windows operating systems shown below.
Note: For details on using the Windows Vista, Linux, and Macintosh OS X operating sys-
tems, refer to the respective manual contained in the WindowsVista, Linux, or Mac
folder in the CD-ROM.
• Windows 2000
• Windows XP
(1) Turn ON the power to your PC to start Windows.
(2) Insert the supplied CD-ROM (Drivers and Utilities)
into the CD-ROM drive.
(3) Follow the instructions that appear on the screen.
(4) The dialog shown in the illustration indicates that
the procedure has been completed.
Click “OK”.
The dialog that appears on the screen varies with your system. This completes the installation
of the printer software. A message will appear, prompting you to restart. Restart Windows.
To Next Page
Loading...
