9
Preparation
Insertion and Removal
To insert the receiver:
1. Hold the tubing at the bend in front of the
receiver with your thumb and forefinger.
Gently insert the receiver into your ear canal.
2. Carefully place the hearing instrument behind
your ear wrapping it over the top of your ear.
3. Place the lock inside the bowl of your ear.
To remove the hearing system:
1. Remove the lock from the bowl of your ear.
2. Remove the hearing instrument from behind
your ear.
3. Grasp the receiver with your thumb and
forefinger. Gently pull out of your ear canal.
Do not pull with the hearing system case as this
may damage the connection.
To Next Page
Loading...
