Starline A96 - Page 41

Triple press of the factory alarm system activation button within a 5-second interval
(availability depends on the car model, consult your installation specialist).
SMS command 21 ;
Voice menu command 21 ;
Via the StarLine mobile app;
Through the personal account on thestarline.onlinewebsite.
Automatic engine start can occur under the following conditions:
Based on temperature value — engine starts when the engine temperature drops below a
set value.
Based on battery voltage value — engine starts when the battery voltage decreases.
Based on time period — engine starts with a specified runtime after a set repeating time
interval.
Based on the alarm clock — engine starts at a specified time.
Temperature and battery voltage values, interval, and schedule are set:
In the remote key cursor menu.
In the StarLine mobile app.
In thestarline.online website personal account.
Engine Stop
The engine stops if:
long press of button 2 on the key fob is performed:
icon-long-2.png
Image not found or type unknown
icon-note-1.png
Image not found or type unknown
;
An owner command is sent:
SMS command 20 ;
Voice menu command 20 ;
Via the StarLine mobile app;
Through the personal account on thestarline.onlinewebsite.
The factory alarm system activation button is pressed three times within a 5-second
interval (availability depends on the car model, consult your installation specialist).
The minimum engine runtime for remote start is 10 minutes. This can be adjusted in the
starline.online website personal account or the StarLine mobile app.
Automatic engine start will not occur if less than 1 hour has passed since the last start or if
the previous automatic start failed.
After a trip, automatic engine start is possible no earlier than 5 minutes after the engine has
been stopped.