To Next PageTo Next Page
Need help?Do you have a question about the Starline A63 and is the answer not in the manual?
General| Brand | Starline |
|---|---|
| Model | A63 |
| Category | Car Alarm |
| Alarm Type | Two-way |
| Communication Range | Up to 2000 m |
| Operating Temperature Range | -40°C to +85°C |
| Power Voltage | 12 V |
| CAN Interface | Yes |
| GSM Interface | Yes |
| GPS Interface | Yes |
| Keychain Display | Yes |
| Keychain Battery Type | CR2032 |
| Shock Sensor | Yes |
| Tilt Sensor | Yes |
| Motion Sensor | No |
| Remote Engine Start | Yes |
| Engine Immobilizer | Yes |
| Panic Button | Yes |
| Smartphone Control | Yes |
| GPS Tracking | Yes |
| Battery Backup | Yes |
| Anti-Hijack | Yes |
| Valet Mode | Yes |
Emphasizes qualified installation and prohibits work by unqualified persons.
Covers parking brake, neutral, park, and manual transmission prep.
Prohibits child use and lists pre-start checks for car condition and climate.
Warning about voltage and necessity of disconnecting terminals for certain modes.
Lists disallowed devices and charging modes.
Warning about connecting/disconnecting battery while engine is running.
States owner's responsibility and safe charging disconnection/reconnection steps.
Covers arming, disarming, immobilizer, and anti-hijack.
Lists commands for engine start, shut down.
Details the steps and conditions for arming with sound confirmation.
Details the steps and conditions for arming without sound confirmation.
Explains how to arm the system silently.
Explains how to arm the system while the engine is running.
How to shut down the engine remotely while keeping the system armed.
Steps for disarming the system with audio feedback.
Steps for disarming without audio feedback.
Procedure for unlocking the engine using a PIN code.
Steps to disarm and release the handbrake to start driving.
Introduces the anti-hijack mode feature.
Procedure for starting anti-hijack via valet button and initial steps.
Details continuous alarms and intermittent/constant engine blocking.
Procedures for disabling anti-hijack using the PIN code or remote control.
Steps to activate panic mode and how to stop the alarms.
Steps to bypass light and both levels of the shock sensor.
Steps to disable and re-enable the tilt sensor.
Steps to enter, set, and exit the tilt sensor sensitivity adjustment mode.
Steps to adjust sensitivity for light and heavy shock sensor levels.
Details on how to perform a two-step door unlock.
Steps to activate the mode and set duration.
Steps to start the engine remotely using the remote control.
Procedure to shut down the engine using the remote control.
Steps for activating anti-hijack when user is identified by tag.
