Starline A63 - SLAVE Mode Operation Overview; Theft and Hijack Protection in SLAVE Mode

StarLine A93, StarLine A63
104
SLAVE mode*
In SLAVE mode, all security and service functions of car alarm are
reserved. Tag function could be used on any LCD or LED remotes. After
turning into SLAVE mode (tag mode) remotes retains all car alarm
control functions. Remote control could arm, disarm, remote engine
start, etc. Additionaly to usual functions remote control in SLAVE
mode work as a identication tag.
StarLine car alarm control
- by factory key or remote control or any other method, used for
specic car).
- by mobile phone.
- by StarLine mobile APP.
- via WEB application - www.starline-online.ru
Car owner identification modes
- without identication.
- identicationby tag (using dialoge code).
- by valet button (input of PIN-code).
- by factory car buttons (input of PIN-code
Protection against car thiefs and jackers
- engine blocking.
- engine blocking and alarm trigger in case of identication failed.
- tag search start only after programmed event (set in programm
functions).
- anti-hijack mode. In case of anti-hijacking user should not make any
actions. Car alarm will automatically block engine in case tag is not
found withing communication range.
*
For StarLine car alarms with installed 2CAN+2LIN, 2CAN or CAN+LIN module.