Starline A63 - Automatic Engine Start Functions; Requirements, Restrictions, and Alarm Clock Start

User’s manual
97
Auto engine start*
To make auto engine start possible:
– function 1 table №2 should be programmed to option 2, 3
or 4;
– HW circuits should be connected to car alarm (consult
installation center).
Auto engine start is restricted if:
• ignition is ON, hood opened, hand brake released, pedal
brake pressed;
• on cars with manual transmission «manual gear
reservation» is not made.
Alarm clock engine start
Before turning on the automatic engine start function by
remote control alarm clock, be sure to:
• the current time on LCD is installed correctly;
• alarm clock is programmed to the desired start time;
• alarm clock is on (conrmed according to the icon).
• 1 light ash
• During 5 s it will be
indication of time
remaining before start;
• LCD shows constantly
icons
conrming
alarm clock engine start
is on;
To activate alarm clock engine start
set cursor on icon
and shortly press
button 1:
remotecar