StarLine A93, StarLine A63
90
Remote engine start*
To make remote engine start you need:
– function 1 table. №2 should be set to option 2, 3 or 4;
– hardware circuits for remote engine start shou ld be made (consult
installation center).
Before performing remote engine start be remote control or
automaticaly activated, in mandatory order read features of
remote engine start.
Particular features of remote engine
start
Remote engine start is restricted in following cases:
• ignition is ON or hood opened;
• hand brake is released or pedal brake is pressed ;
• manual gear reservation is not made for cars with manual
gear transmission
1. In one set of start cycle can be made 4 crank attempts. If after
the fourth attempt the engine does not start, LCD remote control
(provided that it is in reception area) will show «OCT» icon and remote
will give 4 beeps, that means the end of remote engine start attempts.
Followed by 4 light signal of the car.
2. If remotely started engine will shut down before the end of
programmed warm-up time new engine start-up cycle will be
performed.
3. The automatic temperature start-up function of the engine can be
activated regardless of the state of the alarm triggering functions or
periodic start-up.
* Except StarLine A63 ECO and StarLine A63 models.
To Next Page
Loading...