User’s manual
31
Silent arm mode
In silent arm mode if any alarm trigger happens siren signals
will be absent.
Alarm trigger condition is conrmed only by light ashing.
Press button 1 at rst long (until
sound appear), then button 2 short:
remotecar
• 1 light ash;
• Doors locked;
• LED start ashing
• 1 beep;
• LCD panel appear
Indication of silent
armed mode.
In case of trunk, hood,doors are not properly closed or one of
the limit switches of door, trunk, hood failed (constantly
closed), car alarm will inform by 4 light ashes
(see. «Self diagnostic during arming», page. 36).
To Next Page
Loading...
