StarLine A93, StarLine A63
114
Programming protection and
service functions (table 1)
Security and service functions, as well as the parameters of
the the car alarm can be modied by valet button and
remote control. The list of features is shown in the
programming tables. The procedure for programming
details is described in the installation instructions (could nd in
can.starline.ru). We do not recommend do it yourself programming.
If the need arises, consult expert installers. Change of programming
settings or reset to the factory default conditions can cause engine
blocking, as well as incorrect operation of car electrical equipment
and car alarm itself.
Table 1
Alarm function RF
program table
Variant 1 Variant 2 Variant 3 Variant 4
№01 - Door unlock/
lock output current
0,8 / 0,8 sec. 3,6 / 3,6 sec.
twice
0,8 / 0,8 sec.
comfort
30 / 0,8 sec.
№02 - Door lock/
unlock upon ignition
on/o
Brake pedal lock
/ Ignition open
Ignition ON
(10 sec)/
unlock OFF
Ignition ON (
10
sec
)
o
№03 – Into arm
system’s door zoom
detect car’s dome
light or director door
pin switch
Smart bypass for
dome light
for Pin switch
Pin switch delay
30 sec
Pin switch delay
5 sec
№04 - Auto arm or
lock upon last door
close
o On with lock On w/o lock On w/o lock
№05 - Auto rearm
On /O
On with lock On w/o lock o o
To Next Page
Loading...