Starline A63 - Additional CH 3 Control; Additional CH 4 Control

User’s manual
67
Type of additional equipment connected to the channel №1,
is specied during the installation of car alarm.
Additional CH 3 control
Versions of CH 3 activation are dened by function 15 table
№1 (see page 112). Activation happens automatically. For
details see installation manual.
Additional CH 4 control
Versions of CH 4 activation are dened by programmable
functions table №1 (see page 111).
channel activates automatically
for 20 sec after armed.
Version 1:
Version 2:
FLEX programming.
For this version, an activation method (by remote control or
automatically upon event happens) duration and the delay
of the output signal can be programmed. For more
information about exible programming see installation manual.
To activate additional channel 4 by remote control press button 2 for
a long time (until the beep sounds), then button 3 shortly.
Version 3:
Central lock control «lock»
(see installation manual).
Version 4:
channel activates automatically
for 20 sec after disarmed