To Next PageTo Next Page
Need help?Do you have a question about the Starline A93 and is the answer not in the manual?
General| Model | Starline A93 |
|---|---|
| Control Range | 2000 m |
| Frequency | 433.92 MHz |
| Remote Start | Yes |
| Shock Sensor | Yes |
| Immobilizer | Yes |
| Temperature Sensor | Yes |
| Voltage Sensor | Yes |
| Operating Temperature Range | -40°C to +85°C |
| Supply Voltage | 9-18V |
| CAN Interface | Yes |
| Battery Backup | No |
| Anti-Hijack | Yes |
| CAN Support | Yes |
| LIN Support | No |
| Security Zones | 9 |
| Tilt Sensor | Yes |
| GSM Interface | Optional |
| GPS Interface | Optional |
| Communication | Two-way |
| Smartphone Control | Yes |
| Type of Alarm | Siren, Lights |
| Motion Sensor | Optional (with additional module) |
Guidance on manual usage, installation, and user responsibilities for safe operation.
Details on RF, remote range, sensor types, power, and output loads.
Guides on remote control types, commands, status indications, and mode configuration.
Procedures for arming, disarming, system diagnostics, and alarm notifications.
Protection against power disconnection, GSM, anti-hijack, and engine shut down.
Checking car status, sensors, battery, and using call functions.
Adjusting sensors and controlling additional channels for extended functionality.
Turbotimer, engine heater, alarm memory, and button locking functions.
Procedures for remote start, automatic starts, and related settings.
Overview of SLAVE mode, control methods, and user identification procedures.
Immobilizer, anti-hijack activation, and PIN code identification procedures.
Tables for function programming and guidance on remote control battery replacement.
